How to fix the problem if the tray granulator machine stops working?

Nov 06, 2026

Leave a message

Sophia Williams
Sophia Williams
Sophia is a quality control expert in the company. She ensures the high - quality standards of Ritech's shredders, crushers, and other equipment, using strict inspection procedures learned from German technology.

Let’s cut to the chase: if your tray granulator machine just died mid-production, I get it. Last month, a client of mine texted me at 2 a.m. panicking because their line was down for a batch of food packaging trays, and they were staring at thousands in potential lost revenue. I’ve been selling industrial granulators for 8 years now—fixed my fair share of tray granulators, fielded more late-night panic texts than I can count—and trust me, you don’t need to call a $200/hour tech right away most of the time. This step-by-step fix list is based on what I’ve actually seen go wrong, not just some generic manual fluff.

First, let’s make sure we’re on the same page: a tray granulator’s whole job is to chop up used plastic trays (think takeout, food service, even those blister packs) into small, uniform bits for recycling or reprocessing. It’s a workhorse, but like any machine, it throws fits when something’s off. Before you even touch the power, do a quick visual check—9 times out of 10, the issue is something you can spot in 60 seconds without digging into the guts.

Start with the most obvious stuff people skip: power and feed jams. Wait, no—actually, power first? Wait, no, let’s order it logically, from easiest to hardest. First, verify it has power. I can’t tell you how many times I’ve showed up to a call, and the operator just assumed the machine was broken because the outlet tripped the GFI or a circuit breaker in the shop flipped. Tray granulators draw a lot of juice, so if you’re running it on a old, overloaded circuit, that breaker is gonna pop when you run a heavy load. Check both the wall outlet (plug it into a different one if you’re unsure) and the main power panel for your shop’s machinery. That’s step 1, no tools needed.

Next: feed jam. This is the #1 cause of unexpected stops for tray granulators, hands down. Tray granulators aren’t designed to chew up random big chunks at once—if you dump a stack of 10 thick restaurant trays in the hopper at once, that’s a surefire way to clog the blades, and the safety overload will kick in to shut the machine down before it damages something expensive. To fix this: unplug the machine first (safety first, always—no exceptions when dealing with spinning blades), then open the hopper access panel. Use a plastic or wooden pry bar (never metal, you don’t want to chip blades or create shavings that get into your recycled material) to gently fish out the jammed trays, one at a time. Once it’s clear, test the machine with a small feed of 2-3 thin trays to make sure it runs smoothly. Pro tip: If you’re dealing with heavier, thicker trays (like those reusable food service trays), you might even want to pre-split them before feeding—cuts down on jams big time.

If it’s not a jam or power issue, the next common culprit is blade wear or misalignment. Tray granulator blades are sharp, but they’re not indestructible—constant chopping through rigid plastic trays will make them dull over time, or even get slightly bent if you fed something non-tray material last week (we’ve all had that one operator who tries to toss a metal can into the mix, oops). How to check this? Once the machine is unplugged and fully locked out, remove the cutting chamber cover. Look at the rotating blades (the ones on the rotor) and the fixed bed blades (the ones mounted to the chamber wall next to them). If the blades look chipped, dull, or have any visible bends, that’s your problem. For minor dullness, you can sharpen them with a industrial blade grinder, but if they’re bent or chipped deep, you’ll need to replace them. Wait—also, misalignment is a big one too. Even if blades are sharp, if they’re not spaced correctly (usually 1-2 millimeters apart, depending on your granulator model), they won’t chop the tray material evenly, and the machine will stall. If you take a close look and see that the rotating blades are scraping against the bed blades instead of cutting, that’s misalignment—you’ll need to loosen the rotor bolts, adjust the spacing, and retighten them evenly so it’s balanced. Side note: If you ever need new blades or a whole unit, we also carry all sorts of related industrial equipment, like tire granulator equipment for rubber recycling, granulator and crusher machine setups for mixed waste, and plastic PVC pipe crusher machines for hard plastics—you can check those out if you ever need to expand your line.

Another thing that trips tray granulators? The overload relay or motor issue. That’s the thing that kicks in when the motor is working too hard (like from a jam or dull blades) to prevent the motor from burning out. Usually, it’s a small reset button on the motor housing—red or yellow, usually labeled “RESET”. Before you hit it, make sure the jam is cleared and blades are good, because if you hit that button with a jam still in there, you’ll just burn out the motor. Once the chamber is clear, plug the machine in, make sure the load is light, and hit that reset. If it trips again immediately, that’s a bigger motor issue, and you’ll probably need to call a pro, but that’s rare—most of the time it’s just a tripped relay from a jam.

Wait, don’t forget about the screen! The screen is the mesh at the bottom of the cutting chamber that controls the size of the granulated output. If it gets clogged with tiny plastic shavings or leftover tray debris, that restricts airflow and makes the machine work way harder than it should, leading it to stop. To check the screen: Unplug the machine, remove the bottom panel where the screen is mounted, pull the screen out, and hose it down (or scrub it with a stiff brush if the gunk is dried on). Make sure all the holes are clear—any tiny blockage will cause a problem. If the screen is cracked or has large holes, that’s why your output is inconsistent too, so you’ll want to replace that. For all your plastic processing needs, including plastic granulator units for different material types, we’ve got you covered too—head to our page for that if you’re upgrading.

Now, let’s talk about the less common, but still fixable, issues: bearing problems or belt tension. If you’ve gone through all the above and the machine still won’t run, it might be a worn bearing or loose drive belt. The belt connects the motor to the rotor that spins the blades—if it’s loose, it can’t turn the blades at full speed, so the machine strains and stops. To check the belt: Open the side panel of the granulator, look at the drive belt. If it looks cracked, frayed, or is loose enough that you can push it more than an inch with your finger, that’s your fix—either tighten the belt (there’s usually an adjustable bolt on the motor mount) or replace it if it’s worn out. Bearings, on the other hand, are trickier—if you hear a loud grinding or squealing noise when the machine tries to run, that’s usually a bad bearing. That’s a bit more involved, because you have to pull the rotor out to replace the bearing, but it’s doable if you have basic mechanical skills. If you’re handling larger-scale waste like tires, you might need a twin shaft shredder machine to pre-process before the tray granulator, which keeps the load lighter and reduces strain on bearings and belts.

Wait, let’s circle back to safety—this can’t be stressed enough. Every single time you work on the machine, unplug it, lock out the power (like put a lock on the breaker so no one accidentally turns it on while you’re inside), and never reach into the cutting chamber with your hands—even if the machine is off, blades can still catch you. Use tools, always. I’ve seen too many operators get nicked because they got in a hurry, so slow down, take 2 extra minutes to be safe, it’s not worth it.

A quick prevention tip, too, because stopping mid-job is such a pain. I tell all my clients: schedule a 10-minute check-in with your tray granulator every week. Clear the screen, check blade sharpness, make sure feed isn’t too heavy, clean out any debris in the hopper. That cuts down on 80% of unexpected stops. Also, don’t mix non-tray materials—no metal, no glass, no big rigid chunks that don’t belong. Those are the big ones that cause jams and blade damage. And if you’re processing different types of plastic trays (like PP vs. PET), make sure your machine is calibrated for that thickness—thicker trays need a slower feed rate, thinner can go a bit faster.

Plastic Granulator bestPlastic Granulator factory

Let’s test this with a real example: A client a few months back had their tray granulator stop mid-run of 500 takeout food trays. They called me, and I talked them through the steps over the phone. First, check power—circuit breaker was tripped, because they were running the machine and a waste compactor on the same circuit. They reset that, tried it, jammed again. Then they checked the hopper, found a small piece of metal from a soda can they’d accidentally dropped in earlier. Cleared that, checked the screen, it was clogged with old granule shavings, cleaned that out, and it ran perfectly for the rest of the batch. No tech call, no downtime, and they saved like $1,500 in lost revenue that day. That’s exactly why these simple checks work.

If you’ve tried all these steps and your tray granulator still isn’t working, it’s probably a more complex issue, like a damaged motor or wiring problem, and that’s when you’ll want to reach out to a trusted supplier. We’ve been in the industrial granulator game for years, so if you need replacement parts, routine maintenance, or even an upgrade to a newer model, we can hook you up. We also have a full line of processing equipment to support all your recycling needs, whether you’re working with plastic, rubber, or other waste streams—from tire granulator equipment to twin shaft shredder machine for pre-shredding. Just reach out to us to discuss your specific needs, and we’ll help you get your machine back up and running, or find the right solution if you’re looking to upgrade.

Don’t let a broken tray granulator derail your production. Most stops are fixable in 15 minutes or less, with no fancy tools or expensive service calls. Just take it step by step: check power, clear feeds, look for jams, blades, screens, and belts. Safety first, always, and if you need anything from parts to new equipment, we’re here to help.


References

  1. Industrial Granulator and Crusher Machine Operation Manual, AB Industrial Equipment, 2023
  2. Tray Granulator Maintenance Best Practices, Global Recycling Machinery Association, 2024
  3. Safety Protocols for Industrial Plastic Processing Equipment, Occupational Safety and Health Administration (OSHA), 2022
  4. Tire Granulator System Design Guidelines, National Plastics Recycling Coalition, 2023
Send Inquiry
Send Inquiry