How does the separation system in a waste tyre recycling line work?

Nov 05, 2026

Leave a message

Olivia Davis
Olivia Davis
Olivia is a product designer at Ritech. Focused on the customization of waste plastic and tyre recycling equipment, she combines aesthetics with practicality to meet the specific needs of different clients.

If you’ve ever driven past a tire recycling facility, you might’ve glanced at mounds of black crumb rubber, steel wire, and fabric scraps and wondered how that mountain of old, worn-out rubber meets gets sorted into usable, marketable materials. As a waste tyre recycling line supplier, I’ve spent the last 12 years walking clients through every step of that process—and let me tell you, the separation system is the unsung hero here. Without it, all that shredding and grinding would just be a messy pile of mixed waste, not the raw material for playground surfaces, asphalt, or even new tires. Let’s break down how this critical part of a modern Waste Tire Recycling Line works, step by step, from the first shred to the final sorted stream.

First, let’s set the stage: when a used tire arrives at a recycling plant, it’s not just rubber. A standard passenger tire is roughly 45% rubber (natural and synthetic), 25% steel cord (the reinforcing wires that give tires their strength), 20% fabric (usually nylon or polyester, woven into the plies), and 10% additives (carbon black for durability, sulfur for vulcanization, and various chemicals for weather resistance). The goal of the separation system is to split these four components into pure, separate streams so none go to landfill—and each can be sold or reused. This process isn’t random, either. It relies on physics: magnetism, gravity, air flow, and even the texture of each material.

Step 1: Pre-Sorting and Primary Shredding (The First Line of Separation)

Before separation even begins, we have to make the tires manageable. But even here, we’re not just chopping them up—we’re laying the groundwork for better separation later. The first machine in a typical Waste Tire Recycling Line is a primary shredder, a heavy-duty, rotating drum with sharp, hardened steel blades that takes whole tires (rims removed first, usually with a rim cutter) and tears them into 2- to 3-inch chunks. These chunks still have all three components: rubber, steel, and fabric. But we’ve done two important things here: we’ve removed the big, unwieldy metal rims, and we’ve broken the tire into smaller pieces that are easy to move through conveyors and next-stage separators.

Wait—you might ask, why not separate the steel first? Because steel in a whole tire is bonded tightly to the rubber plies; pulling it out whole would take too much energy. Shredding first breaks those bonds on a micro level, so when we go to pull out steel later, it’s already in small, manageable pieces (1-inch or less). That makes the separation 10x more efficient than if we tried to separate whole steel belts.

Step 2: Magnetic Separation (Pulling Out the Steel)

The first real separation step happens right after primary shredding: magnetic separation. Steel is ferromagnetic, meaning it’s attracted to magnets—rubber and fabric aren’t. So we feed the shredded tire chunks onto a conveyor belt that passes over a powerful electromagnet (sometimes called a drum magnet) mounted above the belt. The steel chunks jump off the belt, stuck to the magnet, while the rubber and fabric keep moving. It’s that simple—for steel, at least.

But here’s a trick I learned early on: not all steel is in the same size. Big steel chunks can jam the magnet, so we add a secondary magnetic separator later on, usually an eddy current? No, wait—eddy current is for non-ferrous metals, but ferrous (steel) magnets are for steel. Wait, let me correct that: after the first drum magnet, any tiny steel pieces that got missed go through a second, finer magnetic separator, often a pulley magnet at the end of the conveyor. This pulls out steel as small as a few millimeters, which is critical because even a 1mm steel fleck can ruin crumb rubber that’s meant for high-grade products, like rubber mulch for playgrounds.

For our clients that process truck tires, which have even thicker steel belts, we upgrade to a high-intensity magnetic separator that can pull out steel from thicker, denser chunks. Over the years, I’ve seen plants skip this second fine-magnetic step and end up with 5% steel in their rubber product—costing them thousands of dollars in rejected material. So it’s non-negotiable in a reliable Waste Tire Recycling Line.

Step 3: Air Classification (Separating Fabric from Rubber)

Once the steel is gone, we have a mix of rubber and fabric left. These two are similar in size (both are small, irregular chunks after shredding), so magnets won’t work here. Instead, we use air classification—sometimes called air separation—to split them. How? Fabric is much lighter than rubber. A rubber chunk that’s 1 cubic centimeter weighs about 1.1 grams, while a chunk of fabric the same size weighs barely 0.2 grams.

The air classifier works like this: the rubber-fabric mix is fed into a vertical chamber where a powerful, controlled stream of air blows from the bottom up. The light fabric gets carried up and out of the chamber, while the heavier rubber drops to the bottom, where it’s collected. We can adjust the air flow rate: if we set it slightly higher, we’ll capture a tiny bit of rubber with the fabric (easy enough to add back to the rubber stream later), and if we set it too low, we’ll leave fabric in the rubber.

I always tell new clients to test their specific tire mix first. Truck tires have more heavy fabric, so we crank up the air speed a bit; passenger tires have lighter nylon fabric, so we use a slower, more precise air flow. Some plants add a second air classifier after this one, to catch any fabric that slipped through the first time. At this point, we’ve got two pure streams: almost-raw rubber, and fabric that’s ready to be recycled into insulation or carpet padding.

Step 4: Granulation and Fine Grinding (Prepping for Final Separation)

Now we have rubber chunks, but they’re still too big (1 inch or less) for high-value uses like crumb rubber or powder. So we send them through a granulator, which grinds the rubber into smaller bits, usually 1/4 inch or less. After granulation, there’s still a tiny bit of steel and fabric left—those 1mm steel flecks or tiny nylon fibers that got past the first separators. This is where the final, more precise separation steps come in.

Granulation also does something important: it creates a lot more surface area on the rubber chunks, which makes any remaining foreign material easier to spot. The smaller the pieces, the easier it is to separate the last bits of steel, fabric, and even dirt that came in with the tires. For clients making powder rubber (used in shoes or automotive parts), we add an extra grinding step, called a mill, that reduces rubber to a fine powder—just like face powder, almost. But even then, separation is still needed for tiny contaminants.

Waste Tyre Recycling LineWaste Tire Recycling Line best

Step 5: Eddy Current Separation (Pulling Out Last of Ferrous and Non-Ferrous Metals)

Wait, we already pulled out steel—why more separation? Because sometimes, tires have other metals, like brass or aluminum from valve stems, that didn’t get caught by the ferrous magnets. Those are non-ferrous metals, and they’re valuable too—so we don’t want to miss them. That’s where eddy current separation comes in, the final metal step.

An eddy current separator uses a rotating drum with powerful rare-earth magnets inside, spinning at super high speeds (usually 3,000 to 5,000 RPM). When a non-ferrous metal (like brass or aluminum) passes over the drum, it creates an electrical current (that’s the “eddy current” part) in the metal, which pushes it away from the drum. The lighter rubber keeps moving straight, while the non-ferrous metal flies off in a different direction, into a separate bin.

This is a game-changer for our clients. Before adding eddy current separators, they’d sell their rubber at a discount because of hidden metal, and they’d throw away those brass valve stems. Now, they can sell both the pure rubber and the brass scrap, adding an extra 10-15% to their revenue. It’s a must-have in a modern Waste Tire Recycling Line, especially for plants that process thousands of tires a month.

Step 6: Vibratory Screens and Optical Sorters (Final Polish)

By this point, we’re almost there—but even after all that, there might be a tiny bit of leftover fabric, metal, or even rubber of the wrong size. The final step uses two machines: vibratory screens and optical sorters.

Vibratory screens are mesh screens that vibrate at different speeds and sizes. We feed the rubber into them, and the mesh lets only certain-sized pieces through. So if we want 1mm crumb rubber, the screen lets 1mm pieces fall through, while bigger pieces are sent back to the granulator to be re-ground. That standardizes the size, which is critical for buyers—they need consistent-sized rubber for their products.

For the last bits of fabric or plastic, we use an optical sorter. This machine uses high-speed cameras and artificial intelligence (AI, though I like to call it “smart vision”) to identify different materials by their color and texture. Black rubber is easy to spot against gray fabric, so when a rubber-fiber mix passes by, the sorter blows a puff of air to push the fabric into its own bin. This step removes less than 1% of contaminants, but that’s enough to make the rubber grade A, not grade B.

Why Separation is Non-Negotiable (and Where I See Plants Cut Corners)

I’ve been in this industry long enough to see plants skip steps to save money—like skipping the fine magnetic separator or the eddy current sorter. But here’s the thing: a separation system that’s not calibrated correctly can cost you way more in the long run. Last year, I worked with a plant that saved $20,000 by skipping the second air classifier, but they lost $50,000 in rejected rubber because of fabric contamination. Another client skipped the eddy current separator, and their brass scrap was mixed with rubber, so they got half the value when they sold it.

A good separation system isn’t just a bunch of machines—it’s tailored to the tires you process. If you’re recycling 100,000 passenger tires a month, you need different equipment than a plant processing 50,000 truck tires. That’s why as a Waste Tire Recycling Line supplier, we don’t sell a one-size-fits-all line. We sit down with clients, ask what kind of tires they’re getting, how much they process, and what their end products are, then build a separation system that’s efficient, cost-effective, and produces high-quality materials.

What’s Next for Separation?

The industry is always evolving, and new separation technologies are coming out all the time. Right now, we’re testing AI-powered sorters that can identify even smaller contaminants, like carbon black flecks, that current machines miss. We’re also working on dry separation systems that use even less energy than the current air and magnetic systems—important because recycling has to be sustainable all the way through, not just the end product.

But even with all the new tech, the core of the separation system stays the same: using physical properties to split mixed materials into pure streams. It’s a process that’s been refined over 30 years, and it’s the reason waste tires don’t end up in landfills (though the EPA says we still recycle less than 30% of waste tires globally—there’s a lot of work to do here).

If you’re in the tire recycling business, or thinking about starting a plant, don’t overlook the separation system. It’s the backbone of the whole operation, and getting it right will make all the difference in your profitability. Whether you’re just starting out, or looking to upgrade your line with better separation technology, we’re here to help. You can reach out to discuss your specific needs, and we’ll build a custom system that fits your goals.

References

  1. Rubber Manufacturers Association. (2022). Tire Recycling and Reuse in North America. Retrieved from industrypublications.rma.org/tire-recycling
  2. European Tyre and Rubber Manufacturers’ Association. (2021). Best Practice Guidelines for Waste Tire Recycling Separation Systems. Retrieved from etrma.org/recycling/separation-guidelines
  3. U.S. Environmental Protection Agency. (2023). Sustainable Management of Used Tires. Retrieved from epa.gov/fats-oils-tires/used-tires
  4. Zhang, L., et al. (2020). Advanced Separation Technologies for Waste Tire Recycling: A Review. Journal of Waste Management, 115, 247-261.
Send Inquiry
Send Inquiry